Campbell Hausfeld HU502000 Operations Instructions download pdf (Page 3)

3

HU500000, HU502000

www.chpower.com

General Safety Information

(Continued)

SPRAYING PRECAUTIONS

Do not

spray

ﬂammable materials in

vicinity of open ﬂame or near

ignition sources including the

compressor unit.

14. Do not smoke when spraying paint,

insecticides, or other flammable

substances.

15. Use a face mask /

respirator when spraying

and spray in a well

ventilated area to prevent

health and fire hazards.

16. Do not direct paint or other sprayed

material at the compressor. Locate

compressor as far away from

the spraying area as possible to

minimize overspray accumulation on

the compressor.

17. When spraying or cleaning with

solvents or toxic chemicals, follow

the instructions provided by the

chemical manufacturer.

WHEEL ASSEMBLY (Figures 3 and 4)

Wheel assembly kit includes:

- 2 wheels *

- 2 axle bolts *

- 2 washers *

- 2 nuts *

- 2 wheel inserts *

The items marked with an asterisk (*)

were shipped loose with the unit.

1. Wheel has an offset hub. Place

wheel insert into center of hub. With

offset hub facing axle iron, assemble

axle bolt through washer and then

holes in wheel and axle iron.

2. Place lock washer on axle bolt. Then

tighten nut securely to threaded part

of axle bolt.

3. Repeat procedure with other side.

Assembly

HANDLE ASSEMBLY (Figures 1 and 2)

1. Place ends of handle around tank

and into the mounting pipe. Align

holes in handle to holes in mounting

pipe.

2. Assemble four (4) screws (from parts

package) through holes in mounting

pipe and handle. Tighten screws.

Never use the

handle to lift the

unit completely off the ground. Only

use the handle to lift one end so the

wheels may be used to move the unit.

Figure 3 - Wheel Assembly

(horizontal unit)

Nut

Wheel

Wheel Insert

Washer

Axle Bolt

Axle Iron

Figure 1 - Handle Assembly

(horizontal unit)

Screws

Figure 2 - Handle Assembly

(vertical unit)

Screws

Figure 4 - Wheel Assembly

(vertical unit)

Nut

Wheel

Wheel Insert

Washer

Axle Bolt

Axle Iron

1 2 3 4 5 6 7 8 ... 31 32

Comments to this Manuals

No comments